UBO

Now we are selling Stainless Steel 304 316 Sintered Metal Fiber Felt With Air, welcome to order.-
Home > Products > Filter Element > Sintered Fibre Felt Cartridges
Stainless Steel 304 316 Sintered Metal Fiber Felt With Air

Stainless Steel 304 316 Sintered Metal Fiber Felt With Air

  • Category:Filter Element
  • Material:stainless steel 304,304L,304HC,316,316L,321,430 or as per your request.
  • Properties:
  • Application:water-treatment, water well drilling,oil well drilling ,mineral processing, coal-cleaning plant
  • tag:Stainless Steel 304 316,Sintered Metal Fiber Felt,Air,
Stainless Steel 304 316 Sintered Metal Fiber Felt With AirStainless Steel 304 316 Sintered Metal Fiber Felt With AirStainless Steel 304 316 Sintered Metal Fiber Felt With AirStainless Steel 304 316 Sintered Metal Fiber Felt With AirStainless Steel 304 316 Sintered Metal Fiber Felt With Air
Wire Mesh Wire Mesh
If you can envision it,We can supply it. E-mail:sales@ubofilter.com Editor :Jane

Details of Stainless Steel 304 316 Sintered Metal Fiber Felt With Air:

Sintered metal fiber felt is manufactured from stainless steel fibers through lapping, laminating and high temperature diffusion-bonding (sintering). As a new type of porous material, the non-woven metal fiber has superior filtration function over wire cloth, for it has higher porosity, uniform distribution, greater dirt holding capacity, also can be welded, folded into different shapes. For its excellent filter performance, it is usually added into sintered mesh or sintered filter element as one layer. Multiple layers of metal fiber felt can also be sintered into filter media.

Features of Stainless Steel Sintered Metal Fiber Felt With Air

High heat and corrosion resistance: Work temperature resistance can reach 1000 °C, and stainless steel or alloy for corrosive application, which non-metallic textile, ceramic or polymer product can not compete.

High porosity: It performs with up to 85% high porosity, long on-stream lifetime, high flow rates.

Low pressure drop: The high porosity allows a very low pressure drop, lower energy cost at the same time.

Depth filtration: It enables you to achieve high efficient result through surface filtration and its high dirt capacity offers depth particles capture.

Enhanced gel removal: Addition of metal fiber felt enhances gel removal property of sintered filter media and eliminates fiber breaks during spinning.

Longer life: Stainless steel fiber felt is added into sintered filter media, onstream life can be increased by a factor of two to three times that of conventional wire mesh media.

Application of Stainless Steel Sintered Metal Fiber Felt With Air

catalyst recovery in petrochemical & chemical polymer filtration, gas filter, oil filter , fuel & hydraulic oil filter, water treatment ,etc

Technical Parameter of Stainless Steel 304 316 Sintered Metal Fiber Felt With Air

Length:250mm, OD-53mm

Filter Precision:1~100um

Working Pressure≤31.7Mpa

Working Temperature≤300oC

Medium Viscosity≤260Pa.S

Allow Pressure Drop≤10Mpa

Dirt Holding Capacity≥16.9~41Mgcm2

Stainless Steel 304 316 Sintered Metal Fiber Felt With Air  Stainless Steel 304 316 Sintered Metal Fiber Felt With Air

if you are interested in receiving more information or have a question regarding any of our products please fill out the form below and we will contact you within 24-48 hours.
Stainless Steel 304 316 Sintered Metal Fiber Felt With Air Related
Stainless Steel 304 316 Sintered Metal Fiber Felt With Air News
Stainless Steel 304 316 Sintered Metal Fiber Felt With Air Tips
Copyright UBO Filter Equiment Co.,LtdAbout UBO | Products | news | Service | Contact Us |Frequently Asked Questions
E-mail:sales@ubofilter.com Tel:0086-311-83289301