Custom Sintered Filter Element, Manufacturer

How to deal with the deformation of the Filter strainer

2019-12-25 By zhaozhao

The filter strainer is a metal mesh structural element used for screening and filtering. It is widely used in sieving, filtration, dewatering, and mud removal in many industries. It has high strength, rigidity, and load-bearing capacity, and can be made into rigid screening and filtering devices of various shapes.
The reason for the damage of the filter strainer is that the filter strainer is a wearing part. Different screen materials have different wear on the screen. During the continuous operation of the screening machine, the load on the screen is quite large, which will cause the screen to be damaged. It should be found and replaced in time during the production process. Check the tightness of the screen frame and the screen body. The screen frame and the screen body of the vibrating screen are provided with sealing strips for sealing. The material of the sealing strip is silicone, rubber, and polyurethane. The vibrating screen will generate heat and friction during the screening process, and the sealing strip will deform or rupture after using it for a period of time. It is recommended that the user should regularly check the usage of the sealing strip when using the shaker, and replace it if it is damaged.
Ensure the quality of sieved materials. The trajectory of the material on the filter strainer causes small particles and large particles to not be classified. Usually, this is mostly a question of the angle of the vibration motor. Generally, the motor angle of the vibrating screen is adjusted to 65 degrees when leaving the factory. In use, the motor angle can be adjusted according to the screening of materials. In order to change the trajectory of the material on the screen. To improve the screening accuracy.
How should the filter strainer be welded? If it is a filter strainer roll, in order to support the bars, experts recommend the use of parallelograms. The welded screen drum not only has a more beautiful appearance but also makes it more beautiful. Because most of the filter mesh strips are still used as sieve plates, the pieces to be cut out according to the requirements of the sieve plates are rectangular, so the supporting bars behind are necessarily oblique. If you are using a filter strainer to make an ore screen reel, either rectangular or parallelogram can be made into a cylinder.

Copyright Hebei YUBO Filtration Equipment Co.,Ltd.About YUBO | Products | news | Service | Contact Us |Frequently Asked Questions
E-mail:sales@ubofilter.com Tel:+86 311 8595 5658