Custom Sintered Filter Element, Manufacturer

The importance of storage of Sintered Wire Tubes Filter

2019-12-20 By zhaozhao

In order to avoid damaging the passivation film caused by the substances in the air and making it rusty, the storage of the Sintered Wire Tubes Filter is good or bad. In order to prolong the service life of the sintering screen filter, it is necessary to do a good job in a storage.
A. when there are scratches or notches on the Sintered Wire Tubes Filter, avoid contacting with acid and alkali substances and do not use washing. There are scratches or notches. The passivation film on the surface of stainless steel has weak corrosion resistance. As a result of the self-excited reaction, pitting reaction is formed, forming small holes, and then contacting the unclean East and West. Accelerating the corrosion reaction speed is very bad for the Sintered Wire Tubes Filter.
B. It is not allowed to attach all kinds of acid and bleach on the surface of the Sintered Wire Tubes Filter. It is strictly prohibited to accumulate dust and dirt on the surface. When these things appear, we need to wash them with neutral detergent or warm water.
We must ventilate the long-term stacked sintering screen filter room, check the sintering screen filter regularly, clean and maintain the sintering screen filter regularly, so as to store the sintering screen filter well and extend its service life.
C. the storage of the Sintered Wire Tubes Filter must not be exposed to the airtight room with high temperature or humidity and must be kept in the ventilated room, and the temperature in the room should be controlled at about 20 ℃, the humidity should not exceed 50, and it should not be put together with substances with strong acidity and alkali.

Copyright Hebei YUBO Filtration Equipment Co.,Ltd.About YUBO | Products | news | Service | Contact Us |Frequently Asked Questions
E-mail:sales@ubofilter.com Tel:+86 311 8595 5658