- SS Welded Pleated Metal Mesh Filters Cartridge Related
- SS Welded Pleated Metal Mesh Filters Cartridge News
-
SS Welded Pleated Metal Mesh Filters Cartridge
|
Pleated mesh filter is made of stainless steel wire mesh, or metal fiber felt, which is sintered at each wire contact point to produce a strong surface-sieving porous filter cylinder. Moreover, the filter element is pleated design that further provides large filter area, good dirt holding capacity. Double open-ended or single open-ended is available as per customers' need, threaded end is often equipped with gasket, like o-ring, to reduce the friction of the corrugated filter.
Unlike unsintered mesh, pleated sintered mesh filter enables the use of finer wires to produce more pores per unit area for higher contaminant loading capacity. On the other hand, pleated sintered filter cartridge is more preferred to replace the PP filter cartridge with its back washing and reusability advantage.
1) Strength: As fourth and fifth layers do support, with high mechanical strength and compressive strength.
2) Easy to clean: As a result of surface of the filter material, having means for cleaning characteristics, especially suitable for backwashing.
3) Easy processing: Suitable for cutting, bending, stamping, drawing, welding and other processes.
4) High temperature: 480 can withstand high temperatures.
5) Corrosion resistance: As a result of SUS316L, 304 materials, the corrosion resistance.
6) Filtration: Filtration range of 1-200, has a reliable filter performance.
7) Stability: Because there are two layers to do to protect the screen, plus solid melting diffusion sintering process which make filters is not easily to deform.
Pressure filters for fine filtration in hydraulic steering equipment
Oil and fuel filters
ressure and vacuum filters (disc, cell and drum filters)
As porous media for fluidised beds
Pre-coat filters
Filter candles
Protection of steering and fuel injection nozzles
Insulation / sound attenuation (e.g. aircraft engines)