- stainless steel 304 316 Perforated Pleated cartridge filter micron filter element Related
-
- stainless steel 304 316 Perforated Pleated cartridge filter micron filter element News
-
stainless steel 304 316 Perforated Pleated cartridge filter micron filter element
|
Pleated mesh filter is made of stainless steel wire mesh, or metal fiber felt, which is sintered at each wire contact point to produce a strong surface-sieving porous filter cylinder. Moreover, the filter element is pleated design that further provides large filter area, good dirt holding capacity. Double open-ended or single open-ended is available as per customers' need, threaded end is often equipped with gasket, like o-ring, to reduce the friction of the corrugated filter.
Unlike unsintered mesh, pleated sintered mesh filter enables the use of finer wires to produce more pores per unit area for higher contaminant loading capacity. On the other hand, pleated sintered filter cartridge is more preferred to replace the PP filter cartridge with its back washing and reusability advantage, in applications of corrosive liquid filtration, oxidizing liquid filtration, liquid and gas filtration, etc.
1. Pleated cartridge filter element is strong corrosion resistant and back flushing.
2. Pleated cartridge filter element has high differential pressure with stand capacity.
3. Pleated cartridge filter element has high flow and high porosity and good permeability.
Sintered pleated filter cylinder is widely used for filtration of gas-liquid, high molecular polymer, hydraulic oil, in the following industries:
Mining industry.
Textile industry.
Food industry.
Chemical and pharmacy industry.
Automotive industry.
Insulation industry.